Wristband
- Wrist Bands connect a worker’s skin to ground and are therefore the primary means of controlling static charge on personnel. When properly worn and connected to ground, static charges are safely dissipated from the person
- Meets the requirements of EOS/ESD St, MI L-STD-1686, and EIA 625
Common Grounding Point Cord
- 4.5m cable connects one or two wrist bands and a bench mat to ground
- Assures that all parts are at the same ground potential
- Easy to install, simply snap it to a mat, plug in the wrist strap coil cord and connect terminal to ground
- Resistor 1 Meg mat to ground
- 10 mm female socket that connects to grounding plug
- Meets the requirements of ANSI/ESD S-20.20, EIA625 and ANSI/ESD S6.1
Coil Cord
- 1.8m cable connects wristband to common ground point on table mat
- 1 Meg resistor, ID mm socket snaps to wristband, and the other end is a banana plug
- Meets the requirements of EOS/ESD 51, MIL-STD-1686, and EIA 625
Earth Bonding Plug
- Connects grounding cords to ground
- 1 Meg Resistor, 3 x 10 mm male studs, allowing multiple cord connections per plug